The daily maintenance is coming after installing windows and doors.You should know that different parts of windows and doors need different ways to clean it.There are some tips about how to clean windows and doors you can refer to:
1.Glass cleaningThe key to clean glass is choose appropriate tools. Wether sliding door glass or window glass you can use soft cloth with white vinegar or alcohol to wipe, which makes glass clear and clean. You can also use brush with cleaner to clean following the lines.
Cleaning tips: Once the stained frosted glass is dirty, you can use a toothbrush dipped in detergent to scrub it in circular motions along the pattern. Put a rag under the toothbrush to avoid dripping of sewage; when the glass is stuck by a naughty child When drying adhesive stickers, use a blade to carefully scrape off the stickers, and then wipe them with nail polish definisher to remove all of them.
2.Gap cleaningThe narrow gaps such as door sills and window grooves need to be cleaned by borrowing some tools. For example, wrap a small bamboo stick with a cleaning cloth, and then dipped in a cleaning agent to wipe; if there is a lot of dust, you can also use a vacuum cleaner to suck up the dust in the groove and on the sealing top. If the sealing strip is found to be aging or peeling off during cleaning, it should be replaced and repaired in time. Taber doors and windows use high-quality sealing strips to maintain toughness for a long time and not easy to age.
3.Aluminum doors and windows cleaningWhen cleaning aluminum doors and windows, remember not to use strong acid and alkali cleaners such as decontamination powder, especially for window frames, to prevent corrosion of alloy materials. It is recommended to wipe with a soft cloth dipped in water or a neutral detergent. In addition, we need to be reminded that if you want doors and windows to be durable, you can be more assured when you buy well-known brands. The high-quality hardware system of Taber doors and windows greatly improves the overall performance of doors and windows.
Cleaning Tips: Aluminum alloy doors and windows not only play the role of increasing the brightness of the room, but are also guards to ensure the safety of the family. In addition to regular cleaning, you should always check the joints of the aluminum alloy window frames and walls. If there is any looseness over time, it will easily deform the structure and make the window unable to be closed or sealed. Therefore, the screws at the joints should be tightened immediately, such as screw bases. If the feet are loose, use epoxy super glue to adjust a small amount of cement to seal. In addition, you should always check the tightened bolts, positioning shafts, wind braces, floor springs, etc., and replace damaged parts in time. The vulnerable parts of aluminum alloy windows should be regularly lubricated to maintain cleanliness and sensitivity.
4. Screen cleaningRemove the screen window for the first time to remove debris and clean it, gently flush to wash away dust or cobwebs and other dirt, and then use a brush dipped in soapy water to gently clean the screen window in circular motions, and finally rinse and dry. You can reinstall it.
Cleaning tips: hardware is also a very important part of the window. If the hardware is not clean and timely, causing rust, etc., it will seriously affect the use of the window. Therefore, it is usually necessary to pay attention to cleaning and maintenance, and insist on the cleaning and brightening of hardware. You can wipe it with a soft cloth daily to remove dust. Regarding dead ends, you can use a small brush or toothpicks to clean it.
Leave a Reply